The production and installation of steel mesh confirm these data. Reinforcing mesh is a kind of reinforcing mesh that arranges the longitudinal and transverse reinforcing bars according to a certain distance and angle, and all welding points are welded together.

　　1. 帶鋼的厚度誤差是常見的鋼鐵生產,這個誤差范圍很難控制在生產工程中,主要是因?yàn)榈倪^程,磨料磨具的磨損(基本類型的組件失敗),導致鋼的錯誤,這是不容易控制,但是在這個0。25毫米的射程是可以控制的，超過這個范圍就會有蓄意的懷疑。

　　1. The thickness error of strip steel is a common steel production, and this error range is difficult to control in production engineering, mainly because the final process, abrasive wear (basic type of component failure), leads to steel errors, which is not easy to control, but in this 0. A range of 25 mm is controllable, beyond which there is deliberate suspicion.

　　2. 鋼筋網適用于工廠生產，用冷軋帶肋鋼或冷軋圓鋼焊接而成，是一種良好、的混凝土配合比材料。鋼(英語:鋼筋)凈形狀大小5毫米,誤差范圍是原板在切割過程中,如果做了,在錯誤不會影響鋼結構的安裝鋪設,如果大于錯誤,可能空間,或者不能購物,但是我們公司,經過多年的經驗,基本已經控制誤差范圍在1 - 2毫米。

　　2. The steel mesh is suitable for factory production and welded with cold-rolled ribbed steel or cold-rolled round steel. It is a good and efficient concrete mix material. The net shape and size of steel (English: steel bar) are 5mm, and the error range is the original plate in the cutting process. If it is done, the error will not affect the installation and laying of steel structure. If it is larger than the error, it may be space, or it can not be purchased. However, our company, after years of experience, has basically controlled the error range of 1-2mm.

　　3.對角線誤差:這種誤差主要是由于制鋼過程中，擠壓，或塑料修理引起的熱量不均造成的。

　　3. Diagonal error: this error is mainly caused by uneven heat caused by extrusion or plastic repair during steel making.

　　4,。鋼網的平整度是由鋼網焊機的壓力焊接工藝引起的。安裝固定后，鋼網完全保持平整。另外，我公司采用大型鋼筋網壓焊機，馬華鋼、扁鋼的平整度均小于0。5mm也是檢驗焊接質量的重要指標

　　4, The flatness of the steel mesh is caused by the pressure welding process of the steel mesh welder. After installation and fixation, the steel mesh shall be completely flat. In addition, our company adopts large-scale steel mesh pressure welding machine, and the flatness of Mahua steel and flat steel is less than 0. 5mm is also an important index for welding quality inspection

　　如果你有濟南鋼筋批發的需求可以點擊我們的官網進行咨詢：http://www.iheartcartagena.com/

　　If you have the demand of Jinan Steel wholesale, you can click our official website for consultation: http://www.iheartcartagena.com/