Nowadays, steel mesh is more and more widely used. Here is a brief introduction to the difference between steel mesh and steel bone:

　　1. 鋼網是指在施工過程中直接吊起的預制或焊接的鋼網(主要用于板或墻)。

　　1. Steel mesh refers to the prefabricated or welded steel mesh (mainly used for slab or wall) directly lifted during construction.

　　2. 鋼骨也是預幫好，多在磚混結構中(構造柱、梁等)預幫系好，施工直接整個吊裝屬于鋼骨嗎?

　　2. Steel bone is also pre-stressed. It is usually pre-stressed in brick and concrete structures (structural columns, beams, etc.). Is the whole hoisting directly belong to steel bone?

　　3.強調鋼筋是指鋼網或鋼骨架與現場:其間距之間的距離是指鋼筋的同一行,行間距是指不同的鋼筋行之間的距離,如:a。板軸承鋼棒的行間距是指底下一行之間的距離酒吧和酒吧行(如果有的話)或負彎矩鋼筋。b、柱上鋼筋間距是指同側鋼筋之間的距離，柱上鋼筋間距是指不同側鋼筋之間的距離。(列間距和行間距的確定任何一方應設置為參考,不同的參考而間距和行間距可以交換)c .梁鋼筋間距平行于一行的水平面之間的距離主要加固鋼筋鋼行距行鋼筋之間的距離不同,d.墻體應力的配筋間距與行間距確定等效的雙層板筋架設，相同的豎向或水平鋼筋配筋有助于扎入網中進行配筋，不同的網間距之間的距離是配筋之間的距離有助于扎筋嗎?行間距?

　　3. It is emphasized that the reinforcement refers to the distance between the steel mesh or steel framework and the site: the distance between them refers to the same line of reinforcement, and the row spacing refers to the distance between different lines of reinforcement, such as: a. The row spacing of plate bearing steel bars refers to the distance between the lower row and the bar first row (if any) or negative moment steel bars. b. The distance between the bars on the column refers to the distance between the bars on the same side, while the distance between the bars on the column refers to the distance between the bars on different sides. (the determination of column spacing and row spacing shall be set as reference for either side, and the spacing and row spacing can be exchanged for different references) C. the distance between the beam reinforcement spacing and the horizontal plane parallel to a row is mainly the difference between the reinforced steel rows and the row reinforcement, d. The reinforcement spacing of the wall stress and the row spacing determine the equivalent double-layer slab reinforcement erection. The same vertical or horizontal reinforcement is helpful for the reinforcement in the mesh. Is the distance between different mesh spacing helpful for the reinforcement? Row spacing?

　　一個詞:檢驗批檢驗應區(qū)分是由整體吊裝事先幫助(填充鋼網,鋼框架),或該網站幫助先生(力增強填充),除了如實填寫檢驗記錄,也應檢查間距和行間距是否符合要求,具體檢驗項目不限于鋼筋安裝檢驗批檢查項目(但必須檢查),形成一些規(guī)范相關的項目,還應檢查(包括鋼原材料檢驗批次檢查表、鋼網鋼筋加工檢驗批次檢查表、鋼筋連接試驗批次檢查表和模板安裝檢驗檢查表上軸線位置、垂直度、保護層厚度等)。

　　One word: the inspection lot inspection should be distinguished from the overall lifting prior help (filling steel mesh, steel frame), or the website help Mr. (force enhancing filling). In addition to filling in the inspection record truthfully, it should also check whether the spacing and row spacing meet the requirements. The specific inspection items are not limited to the inspection items of the steel bar installation inspection lot (but must be checked), forming some specification related items, It shall also be checked (including inspection batch checklist of steel raw materials, inspection batch checklist of steel mesh reinforcement processing, inspection batch checklist of reinforcement connection test and inspection checklist of formwork installation for axis position, perpendicularity, thickness of protective layer, etc.).